Showing posts with label aged blade. Show all posts
Showing posts with label aged blade. Show all posts

Sunday, June 1, 2014

Straight back Knife with High grain burl handle

Posting this week is a custom straight back design with a
blade about 5" long both pattern and patina aged.

The handle is a one of a kind piece of high grain stabilized
red wood burl and the spine has been hand file worked.

The sheath has been hand stitched, hand tooled and carved
with a one of a kind design.



Thank you,
Matt
ML Knives
http://www.mlknives.com

Sunday, December 16, 2012

Vintage Custom Knife years Later

This knife you may have seen posted before,  This is one
of my wife's personal knives.  Most of the work this knife
sees is in the kitchen, with once in awhile a fresh water fish.

At this point I cant remember exactly how old this knife and
sheath is, but it's older than ten years.  Closer to eleven.

This knife has seen many years of service and wanted to
show you how well it has aged, including the hand stitched sheath.

The blade on this is about 4 1/2" long.  Handle a bit shorter
than that.  The handle material is bird's eye maple and it
has aged very nice.  The pins are rustic steel pinned.

The sheath on this piece was hand stitched with very old
bark tanned leather that came from the old Muir and Macdonald
Tannery that is no longer in operation.



















Also I have started uploading knife pictures  up to Flickr.  I will keep this updated.
Some of these pics are pictures not seen anywhere else, so If you want to
have a look here is the link.
ML Knives on Flickr







Thank you
Matt
ML Knives
http://www.mlknives.com

Sunday, November 11, 2012

Deep Belly Spear Point More Pictures and Tooled leather work

Posted below are a some additional pictures of the
Deep belly Spear point recently sold from
my available  knives gallery 1

If you jumping here from an Internet search here is a
a little info on the knife.  This piece was forged from
1095 high carbon steel.  The pattern aged blade was
about 4.25 with a tiger maple handle.   The spine
has been beefed up at 3/16" thick and also was hand
(jimped) file worked.   If you click the above link and
scroll down to letter G you will see more info until a
new knife is posted in its place.  The sheath was
antiqued and hand stitched.




















I also have a new page up an running on the website.  I posted the link below
the photo.

This page will be for any available leather work I have done.  Keep checking
as I will be adding new tooled and carved leather works.

















Available Leather Pieces


Thank you
Matt
ML Knives
http://www.mlknives.com