Showing posts with label vintage knives. Show all posts
Showing posts with label vintage knives. Show all posts

Sunday, March 2, 2014

A straight back custom knife with a vintage style. Tooled leather wallet

This week I'm posting a custom order Vintage style straight back
knife with a blade that is about 4 1/2" long.

The finish is a pattern and patina aged finish and the spine has
been file worked.

The handle is about equal in length and in antiqued hickory
with brass pins.

The sheath was antiqued and hand stitched.













Below is a detail photo of one of my custom hand tooled and carved wallets.
More details and info can be found on my
Available Leather Pieces Page
















Thank you
Matt
ML Knives
http://www.mlknives.com

Thursday, January 30, 2014

Vintage knife Work From the Past by Matt Lesniewski

I was recently scanning old photos from years of making knives
for a possible book, and thought I would share this one with you.

This knife must have been made at least 11 years ago maybe longer
and this is the only photo I can find of it at the moment.
If I can find more in the future I will post them.

The blade shape is very unique and one that will lend itself
to many uses.  You can see the tip almost looks like a
butcher tip but at a smaller size and there is a nice
belly to the blade.

I would say the overall blade length being about 3 1/2"
with lots of pattern and patina aging.

The handle is curly maple with some light figure
with a couple brass pins.









Thank you

Matt
ML Knives
http://www.mlknives.com

Sunday, December 8, 2013

A Custom vintage style Trail Knife with Finger Grooved Handle

Posted below is a recent custom piece with a beautiful
vintage look and feel.

This is a drop point style knife with pattern and patina aged
blade at about 4 1/2" long.

Handle is antiqued bone with large brass pins and also has
finger grooves.

Belt Sheath has been hand stitched and antiqued the tooling
and carving on the lower portion has been worked by hand.


















Thank you
Matt
ML Knives
http://www./mlknives.com

Sunday, October 27, 2013

Straight Back Custom with Stag

Recent custom work from my shop posted below.

This is a straight back design that is very traditional with a blade
about 5 inches long.

The handle on this is stag with three copper pins that have been
left with a vintage look.

The hand stitched sheath is a special order as well with a custom
brass snap flap.



















A New Video has been posted as well.


Thank you

Matt
ML Knives
http://www.mlknives.com

Sunday, May 26, 2013

Straight back Frontier style knife and a set of vintage knives

This week's post will feature recent custom work and a
photo of my vintage work.

First is this nice straight back classic design.  A knife of this
design has has many names attached to it through history.

It's straight back spine and just about 5 inch blade would
be an ideal set up for many uses.

The blade has some forge pattern as well as a medium patina.
Handle is very nice antiqued tiger maple.

Sheath hand stitched and set up high ride style with some
hand tooling and carving on the face.











Next is a group of knives I found looking through some older
photos.  This picture goes back to 2005 so all of the knives
were made about 8 year ago or so.
Thought you would all enjoy seeing this.





















Thank you
Matt
ML Knives
http://www.mlknives.com

Sunday, May 12, 2013

Bone Handled Hudson Bay Camp Knife

Recent custom work of a Hudson bay camp knife.  This
blade was about 8 inches long pattern and patina aged .

Handle is antiqued bone with some hand carved hatching.
Pins are brass pins over brass washers.

Hand stitched belt Sheath.












An Additional Photo has been posted up on Flickr
as well.

Thank you

Matt
ML Knives
http://www.mlknives.com

Sunday, May 5, 2013

A Bowie Knife that is a handfull

This Bowie knife was a custom order and is a stout handful
of a knife.

The blade is about 8 inches long and a bit under 2" wide.
The forward clip has been tapered to a swedge.

It is hard to tell from the photo below but the blade has a light
forge pattern that has been hand sanded down to have a clean
look but still has the look of a vintage style blade.

The handle is black walnut with 3 steel pins  and the tang is
exposed and runs past the but end of the handle maybe by
.25

The guard was forged, hand shaped and hand fitted.

The sheath was hand stitched as well and made with an
old school vintage style leather tie.
















Thank you
Matt
ML Knives
http://www.mlknives.com

Sunday, April 21, 2013

A set of Vintage Style knives

This is a custom set of knives for a custom order.

These knives were made with aged black walnut handles and
both have large brass pins.  The smaller of the two knives
has a 5 inch blade and the larger almost bowie shaped
knife has a blade about 9 1/2" long.

Both handles also have a beautiful ball end grip.

All my sheaths are hand stitched but are not in the photo
below.

I did upload a video of the smaller knife that I will post
below the photo.  Time was a factor in not having both
on this video.

thank you
Matt
ML Knives
http://www.mlknives.com

















Sunday, March 24, 2013

Custom Spear Point Knife

Recent custom knife work, of a beautiful spear point.

This knife was special ordered with a beefed up 3/16" spine
stag and (white liners).

The blade is pattern and patina aged and is about 5 inches
long with some nice file work.

Sheath was hand stitched.













I have a good collection of photos I have taken on hikes and woods
journeys here is another one.























Also If you would like to know or get a heads up when new knives are available
for sale in one of the available knife galleries It will not only be posted on the website
but will post it on twitter.   Will also post info and sneak peaks of in works photos
available leather pieces and more as I can.  The picture below will bring you to
the page.









thank you
Matt ML Knives
http://www.mlknives.com

Saturday, February 9, 2013

Close Fighter Custom

Back I think it was in 2005 or so I designed the knife below.

I called this design "the close fighter"

Basically its a shorter version of a longer fighter style at about
a 4 1/2" blade with a tapered forward swedge clip.

There is a pic of one of my early customs in my past
work extended gallery

The close fighter below was done for a recent custom order
with antiqued hickory, steel pins and rear lanyard hole.

This knife has a beefed up 3/16" spine and will equally handle
hunting and skinning chores with no problem.
















On a recent journey into the snow covered woods I took some nice pictures.
One I posted below.  I will post more images from the trip in future posts.

























Thank you
Matt
ML Knives
http://www.mlknives.com

Wednesday, January 30, 2013

Vintage dirk style knife from Past Work

A mid week Look at a custom knife from my past work
collection of pictures.

This piece was made awhile back, maybe 2007 or so.

Piece represents the style of early vintage dirk type knives.

A knife similar in design is shown in Swords & Blades of
the American Revolution by: George C. Neumann on page 236
Titled EUROPEAN KNIFE

The blade if I remember right was about 6 to 7 inches in length
with deep grooved file work.  The handle was aged stag
with steel pins and the forward collar was aged raw steel.

Sheath was hand stitched and set up to wear high on a belt
with some tooling and carved line work on the face.










Thank you

Matt
ML Knives
http://www.mlknives.com


Sunday, January 27, 2013

Crown Stag Antler Knife Custom and Woods and Bush Knife Video

The knife posted below is a custom I did awhile ago.  The Antler
was a special piece to the gentleman that wanted the knife made.

I aged the antler and made him a special custom knife.

A blade of this style and shape has been around for many years
and can handle many tasks from hunting and skinning large
game to a use full tool around the cook pot!

The blade is over 4 inches long and forged 1095 high carbon
steel.

The handle is whitetail antler and the transition piece between
the handle and blade is hard sealed leather.

The sheath was hand stitched and aged a darker brown.

















I also had been wanting to make a small video for awhile now of the woods and bush
knife I make in hand so It's posted below.  You are seeing it before the sheath and
custom hand braided leather lanyard.




Thank you Matt
ML Knives
http://www.mlknives.com

Sunday, December 2, 2012

Hudson bay and a man in the moon

This weeks blog post I have a custom order Hudson bay camp
knife to show you.   This is similar in design to the one I have
carried for years that you have seen pictures and videos of.

The blade is 8 inches long patina aged, with an aged blade walnut
handle, 2 brass pins over brass washers.  The sheath is hand stitched
and made to wear high and cross drawn.



















Also posting some pictures of a recent leather piece I did that was posted
on  my Available Leather Pieces Page.  This page is updated weekly.

This as all my leather work was carved, tooled and done free hand, including
the stitching and layout of the leather.   This is one of my custom credit card
license keepers.  This style also will hold business cards and some cash.







































Thank you
Matt
ML Knives
http://www.mlknives.com


Wednesday, October 10, 2012

Vintage looking straight back knife

This blog post is a mid week look at one of may past works.

This knife has a vintage look to it and very similar is style to
my straight back kephart.

Blades was  about 4 inches and handle about the same
with black walnut and five brass pin configuration.

Sheath is hand stitched and was set up to wear on the belt.

A design such as this one is handy for hunting, survival and wilderness
work and well as all around use.













Thank you
Matt
ML Knives
http://www.mlknives.com

Sunday, September 30, 2012

A Great Knife handle

Something that makes for a very nice knife handle material is
this vintage maple I have been using.

This is very hard traditional old growth maple that has a unique
look and feel to it.  The texture from the rough cut is left on both
sides of the handle smoothed down just enough to not hurt your
hand but to provide a very nice grip.

If you watch the video below you will see on both knives the
handles are a little squarer in shape as the edges are smoothed
down just enough to fill the hand.

This can be used on a select group of knives. So if your thinking
about it in the future for a custom order ask me.

The larger of the 2 knives in this video will be posted up for
sale on the website on Available knives gallery 1 
sometime Monday 10/01/12





















Thank you

Matt
ML Knives
http://www.mlknives.com

Sunday, August 12, 2012

Inside look at a vintage style bone handle custom knife

This is a custom I have in the works and when done with the
sheath it will be set up as a neck knife.

Before it is done I wanted to show a picture of it. 

This is a knife with a blade about 2 5/8" long and the spine
has been custom hand file worked.

The handle is about 3 3 /8" with antiqued bone and a tight
stitched rawhide wrapped forward haft.  The rawhide is
white tail deer skin.

When the entire piece is completed with the sheath I will
post more pictures.

Thank you

Matt
ML Knives
http://www.mlknives.com

Wednesday, July 18, 2012

Hunting and trail knife from past work

This is a custom knife from my past work photos.

A nice style for many uses, hunting and trail use,
also nice for food or freshwater fish.

Blade was about 4 1/2" long if I remember right with a light
pattern aged blade.  The spine was file worked.

The handle is tiger maple with steel pins.   Sheath was hand stitched.

You can see by the pic as well,  this is one of the few photos without
my Indian head penny




Thank you
Matt
ML Knives

Sunday, June 10, 2012

Custom Camp Butcher Knife

This week I am posting one of my custom order Camp Butcher Knives.

These are very nice stout camp and old school style butcher knives
capable of many cutting and camp chores.

Pictures below show this one with a cleaner 8" blade and aged black
Walnut handle, steel pins over brass washers.  The sheath is darker
brown and hand stitched set up to wear left hand carry.
Spine is 3/16" tang.

You can see this knife as well on my
special order page 3 of my website.



Thank you
Matt
ML Knives

Monday, May 21, 2012

A Vintage Style Bowie Knife

This was a recently completed vintage style bowie knife
that left my shop.

Here is some info on this Bowie. 
The blade was about 10 1/2" long with a very nice
patina aged finish and forged steel guard.  The forward
part of the blade was tapered.

The handle is tiger maple set up in a 5 pin fashion.
the sheath was antiqued a darker brown and hand
stitched set up to be worn high.















Also most of you who have followed my work know I share the same
love as all of you for being outdoors, being in the woods, hunting,
fishing, and so on. 

As I can I like to post pics and info on some of my other adventures
and passions.  Maybe even add a separate page on the blog for
this in the future.    Anyway.  On a recent walk with my wife about 5
minutes from my house a local farmer had a flock of geese sitting in one
of his fields. 

The funny thing is all the geese seemed as if they were pointing in one
direction as if they were all looking at something and never did turn around. 
Wish I had a better picture, but the best I could get is below.








thank you
Matt
ML Knives
http://www.mlknives.com/